DO NOT use POWRLINK ZERO if your shoe comes in contact with the Power Pod. Go back to step 2 in the cleat installation instructions to install the Spacer between the Base Plate and Housing.Ĭaution: Failure to check for pod and shoe clearance may result in damage to your shoe and/or POWRLINK ZERO.

If there is not adequate space then you will need to use the Spacer to provide more space and prevent potential damage to your shoe.If there is adequate space between the shoe and the power pod (they should not touch at any point) you do not need to use the Spacer.Rotate your shoe around the spindle to check for clearance. With the pedal on the crank arm, clip your shoe onto the pedal. For more information on shoe compatibility, please see the POWRLINK ZERO Shoe Compatibility Guide.ġ. Repeat these steps for the opposite shoe. Standard Tension Cleats (works with with Shimano SPD Compatible shoes)Įnsure clearance between shoes and Power PodĬheck that the POWRLINK ZERO Power Pod and your shoe do not touch.POWRLINK ZERO Right Pedal (Secondary, connects to left pedal).POWRLINK ZERO Left Pedal (Primary, connects to app/device).Release Angle: Micro Adjustable from 0° to 7.5° Weight: 250g | 0.55lbs total (Left: 138g, Right: 112g)īearing Type: Triple Sealed Cartridge & Needle Bearings Repeated contact between spindle and shoe may void the warranty. Note: with some shoes, additional shims may be required if the sole contacts the Power Pod on the spindle while riding. Please see the full POWRLINK ZERO Shoe Compatibility Guide for additional details. POWRLINK ZERO is compatible with most Shimano SPD ready 3-hole and Speedplay-specific 4-hole road cycling shoes and is designed and optimized exclusively for road and trainer use.

Zero install